Fixed Gas Detection
The Dräger Polytron 6100 EC WL is a wireless transmitter for continuous monitoring of toxic gases and oxygen.
The Polytron® 8100 EC is Dräger’s top of the line explosion proof transmitter for the detection of toxic gases or oxygen
The Dräger Polytron® 3000 is an intrinsically safe gas detector for the continuous monitoring of more than 60 toxic gases and oxygen in ambient air.
The Dräger Polytron® 8700 IR is an advanced explosion proof transmitter for the detection of combustible gases in the lower explosion limit (LEL).
Advant 2 is the explosion-proof fixed dual-channel gas detector for continuously measure the presence of explosive, toxic gases, oxygen, carbon dioxide, as well as volatile organic compounds in the air even hazardous zones.
Advant 4 is the explosion-proof fixed four-channel gas detector for continuously measure the presence of explosive, toxic gases, oxygen, carbon dioxide, as well as volatile organic compounds in the air even hazardous zones.
PG ERIS-414 – Individual portable multi-gas analyzer for the detection of explosive concentrations of inflammable gas, carbon dioxide, toxic gases or oxygen. It allows you to control the level of gas content in staff locations: work areas, wells, and confined spaces.
DGS ERIS-210 RF is a wireless single-channel gas detector with autonomous power and data transmission over the radio channel. It allows providing safety in places of lack of engineering networks. It serves for warning about exceeding the mandatory threshold values for the concentrations of explosive, toxic gases, oxygen and carbon dioxide in the air handling zone.
DGS ERIS-210 RT with repeater function is designed for receiving data from gas detectors DGS ERIS-210 and data transfer to the modem.
DGS ERIS-210 MD with modem function is designed to receive data from gas detectors DGS ERIS-210 and DGS ERIS-210 repeater.
DGS ERIS-PID – The unique gas detector for monitoring of dangerous concentrations of VOC’s.
DGS ERIS-230-FR is the reliable explosion-proof gas detector developed for halocarbon (freon) gas leak detection. Special multi-climate zone design allows for high accuracy and respontse time.
The unique gas detector for monitoring of dangerous concentrations of gases and oil vapors. Verification interval 3 years is significantly reduce the cost of periodic verification, and the warranty period of 3 years and a certificate IEC – excellent confirmation of the high quality and reliability of the device!
The unique gas detector for monitoring of dangerous concentrations of gases and oil vapors. Verification interval 3 years is significantly reduce the cost of periodic verification, and the warranty period of 3 years and a certificate IEC – excellent confirmation of the high quality and reliability of the device!
The unique gas detector for monitoring of dangerous concentrations of gases and oil vapors. Verification interval 3 years is significantly reduce the cost of periodic verification, and the warranty period of 3 years and a certificate IEC – excellent confirmation of the high quality and reliability of the device!
EKTA – fixed automatic continuous system for the control of various gases and vapors in industrial gas environments.
Fire flame detector IP-330 is designed to detect fires involving electromagnetic radiation or flame hearth corruption indoors various buildings and structures, as well as river and sea vessels and industrial facilities.
ERIS-630/631 – bypass level indicators are used for continuous level measurement of liquids by placing them on the side of the tank.
Failsafe intelligent multi-functional controller designed to be key brick of enterprise instrumental control system complies with most critical industry standards. Controller’s modules support a wide range of input interfaces allow connect and manage of variety gas, fire and flame detectors, industrial sensors.
Multi-channel controller (up to 8 analogue inputs, up to 32 RS-485 channels) allow connect to the ERIS and most common gas detectors. Controller equipped with bright LED display and embedded audio and visual alarms, relays. Device support log values and programming features
Gas detection systems SGM ERIS-110 have unmatched flexibility. Certified with wide range of gas detectors produced by ERIS, as well as a number of gas detectors, produced by other manufacturers. Fully configurable system ERIS SGM-110 allows you to connect from 1 to 256 detectors.
Gas detection systems SGM ERIS-110 have unmatched flexibility. Certified with wide range of gas detectors produced by ERIS, as well as a number of gas detectors, produced by other manufacturers. Fully configurable system ERIS SGM-110 allows you to connect from 1 to 256 detectors.
“ERIS SMV 400 Series” Emissions Monitoring Automated Information System (AIS) is designed to comply with Federal Law No. 219-FZ dd. July 21, 2014 “On Amendments to Federal Law ‘On Environment Protection’ and Individual Regulations of the Russian Federation” signed by the President of the Russian Federation Vladimir Putin on July 21, 2014 under “Ecology” National Project.
ERIS S-POINT (SOS button) portable device is used for sending a hazard warning signal to paired devices even in the places with no other communication available. It ensures timely response and prevention of emergency situation at a production site, as well as saving the life and health of workers at the sites.
Mobile applications for devices based on Android OS for configuration of ERIS gas detector.
ERIS LLC offers the innovative solution – gas detector MicroGas for monitoring the remaining life of the gas masks and respirators filter elements.
Multi-Gas Detectors
Specially designed for use with a pump, optimized for clearance measurement and detects up to 7 gases.
Specially designed for clearance measurement, reliably detects flammable gases and vapours as well as O2, CO, H2S, NO2 and SO2.
Optimised for measuring in the low ppb to ppm concentration range and detects carcinogenic vapours like benzene starting at 50 ppb.
Personal multi-gas detector, detecting up to 4 gases as well as O2, CO, NO2, SO2 and H2S.
Personal multi-gas detector, detecting up to 5 gases as well as O2 and harmful concentrations of toxic gases, organic vapours, Odorant and Amine.
Personal multi-gas detector with an ergonomic design and innovative infrared sensor technology, detecting up to 6 gases.
Measurement of up to six gases with the Dräger X-am® 5600 multi-gas detector and extends the portable gas detection technology to a comprehensive system with many applications.
Non-disposable, personal single-gas detection device, with dual sensor capability can be equipped with a hydrogen-compensated Carbon Monoxide (CO) sensor or a Dräger dual sensor
Detects hazardous concentrations of 29 different gases, including special gases like Nitrogen dioxide (NO2), Ozone (O3) or Cobalt(II) Chloride (COCl2).
Disposable personal single-gas detection device. Measures Carbon Monoxide (CO), Hydrogen Sulphide (H2S), Sulphur Dioxide (SO2) or Oxygen (O2)
Gas Detection Tubes
The Dräger Diffusion tubes are direct reading systems used for the determination of time weighted average concentrations over the duration of one to eight hours.
Fast measurement with one hand: The Dräger-Tube pump accuro allows you to use the established Dräger-Tubes to take measurements under extreme conditions.
The automatic tube pump Dräger X-act® 5000 is the first all-in-one solution designed for measurements with Dräger short-term tubes and for sampling tubes and systems.
Tried and tested a million times: Worldwide, the Dräger Short-term Tubes have proven to be a very cost-effective and reliable method for the measurement of gases.
